Mag drill centering tool.

The top of this piece is specified to be cut to fit a 3/4 weldon shank mag drill and it fits nicely. It fits nice and tight into the top plate and lines up the mag drill over the bore. I probably would not make any changes to this design as the fitment is nice and tight.

May 09,2025
996 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Joseph Ho View Profile
3posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    A very, very easy build, and the finished device works perfectly. Note that my photos show a previous generation of the 3D printed case which required a bit of manual trimming around the amp module.
    The speed at which these PCBs were built and shipped was extraordinary! In just 8 days, it was approved, built and shipped. The quality is also really precise and good, as always.
    Ottimo servizio, come sempre, molto veloci e veramente Professionali. Grazie e alla prossima
    This was my test piece to see if dimensions were accurate and the product fit well. The machining was spot on, the end result was perfect. I'll be looking to purchase more
    The design of this PCB, was born from the need to have a cover for our box, with different mountings and functions. This is just the first of a long series of different PCBs. The importance of the c...
    Ottimo servizio, come sempre, molto veloci e veramente Professionali. Grazie e alla prossima
    My project PCB was not such complex it was based on M1's Dock with Battery charging, protection and also Lora module. the PCBWay providing best sevices but they charge for 5PCS of PCB about $25 to $30...
    Fast and cheap! What else could I ask for? Will definitely do more business with PCBWay, even with the tariff wars going on!
    SHOW ME MORE