in electronic circuit Coupling capacitors are used in series to allow only high-frequency signals to pass to the system load, as in the following image. Decoupling capacitors, also known as bypass cap...
In-Ears headphones use magnetic dynamic drivers. If you bring the in-ears close to an electronic device that releases magnetism with a 29" CRT TV (coils, speaker) turned on, will this TV cause demagne...
I'm interesed in ordering the Wandy Amaury Dual ESP32-C6 gateway PCB Proyect board, but i would need the ESP32 to be the WROOM-1U version instead of the WROOM-1
Hi, are you guy's able to install male and female NEMA 5-15P connectors into a mold injected part that is manufactured by pcbway? and if so, where would you source it from?(I sent a few pictures ...
I would like to ask if you will be able to procure one of the following USB-C connectors, as I want you to assemble them in a future project:https://www.digikey.com/en/products/detail/assmann-wsw-comp...
Good morning! First off, thanks for making this open source. I love all of your work. I am in the process of ordering parts and have a question about the values of L1 and L2 on the processing board fo...
Manufacturers of aluminum electrolytic capacitors in storage recommend energizing these components once every 1 or 2 years and the temperature range is 5-35C and humidity is below 75C. After this inte...
I have electronic devices manufactured in the early 90s and early 2000s and they use aluminum electrolytic capacitors and I store them in my house at a temperature of varies 34-36C with varies humidit...
I am sorry I moved here from jlcpcb, I am quite confused with interface, where do I look for components library? I need to search for specific type of components and see what components pcbway can off...
Hi, we're planning to use your SIM800L Module (LP099) in a project and need the appropriate technical documentation, namely:pinout, dimensions, connector coordinates3D model, if available
