400W Hifi Amplifier Class AB, Toshiba C5200N and A1943N Designed by Rahul Sharma ( Indian Xtreme Audio )
Here is your refined and pointwise version of the Indian Xtreme Audio XAB 4 GEN 1 Amplifier description:
Indian Xtreme Audio – XAB 4 GEN 1 Amplifier
High-Fidelity Class AB Stereo Amplifier
The XAB 4 GEN 1 is a premium-quality Class AB amplifier designed for audiophiles, DIY audio builders, and high-fidelity enthusiasts. Built with professional-grade components and a focus on sonic precision, this amplifier ensures an immersive, clean, and distortion-free audio experience.
🔧 Technical Highlights:
Class AB Design for warm and dynamic sound signature.
THD (Total Harmonic Distortion): Only 0.05% – ensures ultra-clean audio output.
Frequency Response: Wide band from 20Hz to 25kHz, ideal for full-range listening.
Power Output:
150W RMS @ 4Ω (±40V DC)
150W RMS @ 8Ω (±56V DC)
Working Voltage: Operates at ±50V DC for optimal performance.
Transistors: Uses Toshiba C5200N complementary pairs.
Precision Components:
100% Genuine Vishay parts.
1% Metal Film Resistors (MFR) for high accuracy and minimal noise.
🛡️ Built-in Protections:
Short Circuit Protection
Thermal Protection
Overcurrent and Overload Protection
Speaker DC Block Protection
Zobel Network for stability and speaker safety
⚙️ Performance Features:
Bias Current Adjustability – allows fine-tuning to reduce crossover distortion.
High Damping Factor (400+) – ensures tight bass and precise speaker control.
Samwha Power Capacitors – reliable and stable power delivery under load.
🌡️ Cooling & Monitoring:
High-Quality Vertical Fins Heatsink – ensures effective passive cooling.
Thermal Protection Circuit
Power LED Indicators for status monitoring
🔌 User-Friendly Design:
Inbuilt Rectified Power Supply – for direct transformer connection.
Fully Connector-Based Interface – no soldering required for assembly.
Manufactured by JLCPCB – for clean, professional-grade PCB finish.
🎯 Ideal Applications:
High-fidelity home stereo systems
DIY amplifier builds
Audiophile speaker setups
Studio and professional use
The XAB 4 GEN 1 is a perfect blend of performance, protection, and ease of use — a true powerhouse for any high-end audio setup.
400W Hifi Amplifier Class AB, Toshiba C5200N and A1943N Designed by Rahul Sharma ( Indian Xtreme Audio )

- Comments(1)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Rahul Sharma
-
LM3886 Special Edition Amplifier Board, Expendable PCB, 5.1 or 7.1 Amplifier In this project we made an amplifier using Hi-fi and popular LM3886 Gainclone Amplifier IC. Many of...
-
400W Hifi Amplifier Class AB, Toshiba C5200N and A1943N Designed by Rahul Sharma ( Indian Xtreme Audio ) Here is your refined and pointwise version of the Indian Xtreme Audio XAB 4 GEN 1 Amplifier descript...
-
800W TRUE RMS PROFESSIONAL AMPLIFIER BOARD this is Class AB Professional Amplifier Based on Rockola Circuit. It Uses Complementary Pairs in Out...
-
10 LED STEREO SIMPLE VU METER BASED ON KA2281 IC A volume unit (VU) meter or standard volume indicator (SVI) is a device displaying a representation ...
-
Active Bi-Amping Amplifier Board using TDA7294 Hi-Fi Audio IC INTRO :-We have built a Bi-Amp board using TDA7294 Audio Amplifier IC. Bi-Amping is a technique wher...
-
5.1 Channel TDA7294 Audio Amplifier Board Hi-Fi Audio IC (7x TDA7294) INTRO :-we have made a 5.1 Channel Amplifier Board using TDA7294 Audio Amplifier ICs. On a single bo...
-
400 Watts True RMS Stereo Amplifier Board with inbuilt DC Rectified supply. Its 400W Stereo Amplifier Board. Works on 45-0-45 12A Transformer, Designed in Single Layer to Get e...
-
200 Watts mono amplifier Board This is an Mono audio amplifier board, with a maximum output of 200 Watts RMS at 4 ohms + - 56VDC. T...
-
MIDI FORGE Maestro - Wavetable Board emulated using Raspberry Pi Zero 2W
119 0 1 -
-
-
Gioia glittering fashion - 21 monocrome leds
283 0 1 -
-
-